The Bolin D20S is a bi-directional Dante AV Ultra converter with 12G SDI input and output. It also has an HDMI output.
It transports up to UHD/4K60 4:4:4 video output with ultra-low latency and lossless quality. It supports HDCP as well as IP PTZ camera control and embedded audio and RS-RS422/IR control pass-through.
As part of the Dante Audio over IP Eco family, the D-Series decoder provides a powerful virtual video matrix routing solution using standard Gigabit Ethernet network switches and CAT5e UTP cabling for the presentation of multimedia and live camera images as well as Dante 4K video applications, e.g. for demanding conference room and classroom applications.
Powered by DanteAV™ module
In conjunction with the Bolin D412/D220 DanteAV PTZ camera, the Dante AV decoder of the D-Series achieves lossless video output and extremely low latency with video and audio synchronization.
The D-Series decoder is designed to integrate seamlessly into an existing Dante audio ecosystem. It is managed with the Dante Controller software and offers the flexibility to route audio and video independently with sub-microsecond accuracy to minimize timing issues.
Dante Ecosystem friendly
- immediate compatibility with over 2000 existing Dante-enabled products.
- Unified control of camera audio and video with familiar tools - Dante Controller.
- No need to replace the network infrastructure. Dante AV works with already installed, cost-effective 1Gbps network devices.
- Uses Dante controllers and endpoints so you can easily check the routing of video and audio control with the click of a mouse.
JPEG 2000 from intoPIX enables Dante AV:
- Creation of 4K multiscreen environments in which audio can be routed to any location
- Perfect lip sync for live presentations with video thanks to ultra-low latency
- Easy deployment and management of video walls at lower cost thanks to the use of Cat 5e cables and switches
- Simplify the installation and use of conference rooms that combine video and audio media.
Quoted from www.intopix.com
Lossless picture with extremely low codec latency
Bolin's D-Series decoder transports up to UHD/4K60 4:4:4 video output with extremely low latency and lossless quality.
The D-Series decoder contains an optimized implementation of the popular JPEG2000 codec in the FPGA, which delivers a visually perfect, lossless image at 4K60 with a codec latency of 10 ms.
100% synchronized video and audio
The DanteAV D-Series decoders have integrated Dante's sub-microsecond synchronization for video and audio. A single Dante network clock keeps the camera video in sync, regardless of the number of endpoints, making the problem of lip-sync a thing of the past.
HDMI output supports EDID
The D10H provides a decoded picture for output via HDMI 2.0 that supports EDID. The integrated high-performance scaling engine enables upscaling and downscaling of the encoded source for a wide range of UHD and HD resolutions to meet the different capabilities and requirements of sources, displays, codecs and other devices.
Remote control and monitoring
The D-Series has an integrated serial interface (RS-422) that can be used for PTZ joystick control via Dante Serial Over IP with the Visca protocol. It also has IR over IP for controlling connected displays or other devices.
Features
DanteAV decoder in combination with Bolin D412/D220 DanteAV PTZ camera
Together with the Bolin D412/D220 DanteAV PTZ camera or as a standard DanteAV decoder, the D-Series decoder integrates into the Dante Audio over IP platform using a standard 1 Gbps network. With a variety of Dante control interfaces, support for Dante Device Protocol, packet bridging, AES67 and video and HDCP encryption and professional onboard scaling, the D10 can seamlessly connect a DanteAV product with networked control to the growing ecosystem of Dante AV and Dante Audio enabled products.
Multi-screen video display routing
The Dante AV Decoder receives the signal from a DanteAV PTZ camera or encoder and passes it to a display device via the HDMI and/or 12G-SDI output. Using familiar Dante controller software, the decoder can quickly and easily switch between multiple DanteAV endpoints, including cameras or encoders on the network, without the need for breakouts or matrix switches, to display the video on any number of screens and make the video available to the video router system.
Implementation of HDCP 2.2 encryption
Complies with the latest HDCP 2.2 specification for High-bandwidth Digital Content Protection. Enables the transmission of protected content streams between authenticated devices.
Supports Dante controller
Full setup, control and monitoring of the device is enabled by the Dante Controller, which provides standard Dante features such as automatic device discovery and system configuration, making network setup a simple plug-and-play experience.
Always up to date
Firmware updates, update via the IP interface of the Dante controller to keep the functions and performance of the decoder up to date.
Audio formats, Dante audio over IP, AES67 RTP
The Dante AV decoder of the D-Series supports AES67-compatible network audio streams from encoders and audio interfaces. The received Dante audio streaming or AES67 audio stream can be combined with the video and then output via the HDMI output.
Two Ethernet connections and POE
The Dante D-Series AV decoder has two RJ-45 1000BASE-T ports that can be used to transmit video over a Gigabit Ethernet network. Port 1 is used for the primary connection to the Dante network and port 2 can be used for daisy chaining to other endpoints. Port 1 can also be supplied with power.
USB HID and USB OTG
USB control over IP, which can be switched and routed together with the AV signal or separately via a control system, enables the use of a USB mouse and/or keyboard to control a remote computer via the Dante network. USB On The Go (OTG) for keyboard and mouse
Technical specifications
Decoding
- Video codec optimized implementation of JPEG2000 codec in FPGA, licensed by IntoPIX
- Video resolutions up to 4096x2160@60Hz; RGB 4:4:4 @ 8 bit YCbCr 4:4:4 @ 8 bit YCbCr 4:2:2 @ 8/10/12 bit
- Color depth 8-bit, 10-bit, 12-bit
- Audio formats Dante Audio over IP
- Bit rates 200 to 800 Mbps
- Copy protection HDCP 2.2, HDCP 2.3 for network,
- Latency 0.5 frames (e.g. 2160p @ 60 Hz latency is < 8 ms between encoder and decoder), Note: The total latency may increase depending on the network configuration
- Instant Dante ecosystem compatibility with existing Dante-enabled products; unified control of audio and video with Dante tools - Dante Controller
HDMI output
- HDMI 2.0 format: HDCP 2.2, EDID
- Supported resolutions 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
- Frame rates (Hz) 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- Color space RGB, YCbCr
- Component bit width 8-bit, 10-bit, 12-bit
- Color subsampling 4:4:4, 4:2:2, 4:2:0
- EDID: YES, only for D10H
SDI Output
- Only D20S available
- Format 12G-SDI
- Supported resolutions 4096x2160p, 3840x2160p, 1920x1080p, 1920x1200, 1600x1200, 1280x720p, 1280x1024, 1024x768, 800x600, 720x576p, 720x480p, 640x480
- Frame rates (Hz) 23.98, 24, 25, 29.97, 30, 50, 59.94, 60
- Color space YCbCr
- Component bit width 10 bit
- Color subsampling 4:2:2, 4:2:0
- Standard SMPTE 292(1.5Gb/s), SMPTE 424, SMPTE 425-A(3Gb/s), SMPTE 2081, SMPTE 2082 With SMPTE352 Supported SDI metadata
Audio
- Audio transport formats: Up to eight channels at 44.1, 48, 88.2 or 96 kHz. HDCP-fed audio channels are limited to 48 kHz. Embedded HDMI 7.1 audio.
- Bit depths 24, 16 and 32 bits per audio sample
- Embedded audio via HDMI output 2 channels from DANTE
- Output sampling rate 48K and 96K, PCM24(24, 16 and 32 bits)
Communication/Connector
- ETHERNET 1 POE IEEE 802.3ab-compliant 1000BASE-T Ethernet connection, IEEE 802.3bt type 3-compliant, PoE++ class 4 (60 W)
- ETHERNET 2 IEEE 802.3ab-compatible 1000BASE-T Ethernet connection
- HDMI output: HDMI connection type A, socket; digital HDMI video/audio output
- SDI output: (D20S) BNC, 75Ω,
- USB 1, USB 2 USB type A port, female; USB 2.0 host port; USB signal extension port for connection to a mouse, keyboard; Available power: 500 mA at 5 VDC.
- USB OTG (On The Go) host computer mouse (Dante AV transmitter)
- Serial control RJ45, RS-422 compatible with Visca control PTZ camera
- IR TX, IR RX 2-pin 3.5 mm, carrier frequency: 38 kHz; supply voltage: 3.3 V to 5 V.
- LED display Power, Codec, System, Error, Sync, HDCP
Network Dante AV
- Standard 1Gbps Ethernet
- Audio channels x8, flow x15 (unicast or multicast)
- Videoflow x1 (unicast or multicast)
- Hardware timestamp that supports sample-accurate playback
General information
- Power consumption @ 4K60: 38W (D20S); 25W (D10H)
- PoE (D10H) PoE+, compliant with IEEE 802.3at Type 3 Class 5
- PoE (D20S) PoE++, IEEE 802.3bt Type 3 Class 5 compliant
- Power adapter input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz, output: 4A @ 12 VDC. 12V DC IN has priority over Ethernet 1 POE. Ethernet 1 POE becomes active a fraction of a second after 12V DC IN is disconnected.
- Storage temperature -40 to 100℃
- Operating temperature 32° to 104° F (0° to 40° C)
- Humidity 10% to 90% (non-condensing)
- Heat dissipation Fan speed adjustable, 3 levels
- Acoustic noise NC35 or less, variable with adjustable fan speed
- Conformity CE, IC, FCC Part 15 Class B digital device
- Housing color metallic black
- Mounting (included in scope of delivery) HDMI cable holder, surface mounting for TV display, plinth mounting.
- Mounting (optional) 19-inch single-rack mounting, 19-inch double-rack mounting, Din rail mounting
- Dimensions 216.5x148.35x44mm (LxWxH)
- Weight 1.3 kg (net weight)